Zinc-Coated

BUNOL AS 500

The BUNOL AS 500 high performance wire fulfils more demanding requirements in terms of the machining speed and the quality of the surface finish. It is characterised by very good value for money and replaces pure brass wires.

 

Application:
BUNOL AS 500 is particularly suited for the machining of complex parts with wire angles of more than 10°. High quality surface finishes are achieved even under difficult machining conditions.

bunol AS

verzinkt

Resistance N/qmm: > 500
Tolerance on diameter (mm): +0/-0,002

Art.-No.	OEM No.	Ø	Spool size
0502205B-AS		0,20 mm	K 125
0505205B-AS		0,20 mm	P 5
0503205B-AS		0,20 mm	K 160
0508205B-AS		0,20 mm	P 10
0504205B-AS		0,20 mm	K 200
0507205B-AS		0,20 mm	P 15

 
 

BUNOL AS verzinkt   Resistance N/qmm: > 500 Tolerance on diameter (mm): +0/-0,002

Art.-No.	OEM No.	Ø	Spool size
0502255B-AS		0,25 mm	K 125
0505255B-AS		0,25 mm	P 5
0503255B-AS		0,25 mm	K 160
0508255B-AS		0,25 mm	P 10
0504255B-AS		0,25 mm	K 200
0507255B-AS		0,25 mm	P 15
0509255B-AS		0,25 mm	K 250

 
 

BUNOL AS verzinkt Resistance N/qmm: > 500 Tolerance on diameter (mm): +0/-0,002

Art.-No.	OEM No.	Ø	Spool size
0502305B-AS		0,30 mm	K 125
0505305B-AS		0,30 mm	P 5
0503305B-AS		0,30 mm	K 160
0508305B-AS		0,30 mm	P 10
0504305B-AS		0,30 mm	K 200
0507305B-AS		0,30 mm	P 15
0509305B-AS		0,30 mm	K 250

 

< Önceki		Sonraki >